Best Flushing Toilets
best-flushing-toilets-cover-photo

Are macerating toilets noisy? Tested Result

Suppose you are using a macerator toilet, and there is a thin wall between your bathroom and the flat of the owner who lives next to you. If your toilet produces a lot of noise, the person next to you can feel uncomfortable.

The macerating toilet users have a complaint against it. The toilets may produce so much noise that it becomes terrible for them. However, the toilet also disturbs people with its terrible sound when it is in the house next to our flat.

Why is the macerator toilet so noisy?

The sound pollution caused by a macerator toilet happens for several reasons. There is a blade that works inside the toilet. If something gets stuck to the blade, it can jam. As a result, the toilet can produce more noise, become noisier, and finally stop flushing.

How do you fix a noisy Macerator toilet?

Repairing a Macerator toilet is an easy process. If your Macerator toilet makes a terrible sound, you have to go through the following tasks:

Remove the sticking thing from the blade: You must disassemble the toilet and gain access to its inside area. Check the blade and find out what material sticks to it. Remove it and make the blade free.

Change the blade: Sometimes, the condition of the blade mechanism of the Macerator toilet may be so problematic that it cannot be repaired. So, you must throw out the blade and add a new blade to the toilet mechanism.

What are the other issues with a Macerator toilet?

Some problems with a Macerator toilet should be known to the users. They must have a sufficient idea about the problems and their repair process so that they do not feel it is impossible.

01. Macerator toilet smells bad

This problem occurs when the toilet becomes old but is not thoroughly cleaned. When a toilet is new, it does not spread a bad smell because the toilet does not have a lot of germs. But, after a long time of use, the toilet gets touched with more garbage and gradually smells bad.

Solutions: The perfect solution to this problem is deep cleaning. You can use dishwasher detergent or a toilet cleaner to clean your toilet deep. A vinegar and baking soda mixture can be a good solution, too. This mixture will disinfect the toilet and make it hygienic.

02. Generator pump is starting itself

Starting a pump requires an order with the on-off switch. But if the pump starts automatically, it indicates that the pump has a functional problem, and you have to repair it quickly. There are primarily two reasons why the macerator pump starts without command.

Microswitch misfiring: An electrically flashing toilet depends on a perfect electrical connection. But if the microswitch misfires, it can turn into a significant issue even if the toilet switch malfunctions.

Damaged rubber membrane: The rubber membrane acts as a barrier between the electrical toilet switch and the toilet. If the membrane is damaged, dirt can enter the switch. As a result, the switch may stop working.

Solution: Starting the toilet itself is a symptom of the issues. So, whenever you face problems, you have to repair the microswitch and rubber membrane immediately. If they are not repaired, you can replace them.

03. The macerator is pumping but cannot remove the waste

Sometimes, you can see that your Macerator toilet is pumping well, and the toilet flashing process is okay. But the toilet is still dirty. There is a functional issue with the toilet. If the waste pipe of the Macerator toilet is frozen, it will not make a large way to release the toilet garbage because the line is jammed.

Solution: A service engineer or an expert plumber can solve the issue. First, the macerator must be switched off. Now, remove the garbage remaining in the macerator toilet by loosening it. Before loosening the macerator, you have to use a hot towel to heat the frozen pipe.

04. The foam is coming from the vent

If you notice that white foam is coming from your toilet pump, you should realize that you overused the toilet cleaner or bleach. A significant amount of foam from the cleaner remains in the toilet and comes out of the vent gradually.

The outcome of arriving white foam is not obvious. The system’s motor can be damaged and eventually stop working. So, if you don’t want to spend money after replacing the motor, you’ll have to figure out a way to fix it.

Solution: First, you have to decrease the use of toilet cleaner. Therefore, your toilet vent pipe will be free from the foam of the cleaners. If it is possible, you can open the vent pipe and motor and clean them. Sometimes, the micro switch on the macerator toilet needs to be replaced if the motor gets turned off due to a malfunction of the switch.

Frequently Asked Questions

  • Are Macerator toilets good to use?

Although Macerator toilets have many critics, they also have several advantages.

Macerator toilets are prone to blockage. From tissue paper to large elements, they are reliable for blocking the toilet. But the simple toilet system is good for setting up the toilet anywhere and very quickly. So, the Macerator toilet is popular.

  • Where should I not use a Macerator toilet?

The place with a strong possibility of power failure is unsuitable for establishing a Macerator toilet. The power is very necessary for operating the macerator. Moreover, it needs to remove the toilet garbage and make it dirt-free.

  • How can I soundproof a Macerator toilet?

Loud noise is the major problem with a Macerator toilet. There are some available soundproofing materials, including spray or foam. If you want to soundproof your Macerator toilet, you must apply the materials behind the wall and under the floor. Moreover, you can place the toilet on a rubber mat or a rug to decrease the sound. The rubber and mat are soundproof, so they will help you escape the unwanted noise of the Macerator or Saniflo toilet.

Final thoughts

The Macerator toilets were popular because they used less water and required less maintenance. Moreover, the water in the tank of the Macerator toilet remains at a certain level that is sufficient for flushing currently. As a result, you do not have to wait for the toilet to fill.

The best way to use this toilet is to call an efficient plumber whenever you find out there is a problem with it. Moreover, sufficient care after the toilet helps get its best service.

 

Hi, I am Jose S. Franz. Currently, I am working as a professional plumber, and our team offers various plumbing services at an affordable price. After my college education, I completed a vocational certification course in plumbing systems and worked with several construction companies. Since then, I have fixed lots of different toilet models, from older to the latest versions. So I have more than 22 years of experience installing plumbing systems and toilets in both residential and commercial buildings.

About The Author

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top