American Standard Cadet Pro Compact Toilet- Features and Reviews

Last Updated on October 14, 2026

The Cadet flushing system and PowerWash rim help move waste and rinse the bowl during a flush. They do not make the toilet clog-proof. Excessive paper, wipes, or a restricted drain can still cause problems.

EverClean helps inhibit the growth of stain- and odor-causing bacteria, mold, and mildew on the treated surface. It does not replace regular cleaning or make the toilet a disinfected surface. Use a suitable nonabrasive cleaner and follow the manufacturer’s care instructions.

The 1.6 GPF flush uses more water than the 1.28 GPF model reviewed below. It can still reduce consumption compared with an older toilet that uses substantially more water. If your area requires a lower flush volume for new installations, check that requirement before buying.

A right-hand lever does not automatically rule out an accessible installation. Lever position must suit the room layout, and accessibility also depends on the installed seat height, clearances, grab bars, and control operation. Have the complete installation checked where accessibility requirements apply.

For another option, read our Champion 4 toilet review. For a broader look at flushing designs, see our Champion 4 and Cadet 3 comparison.

Reasons to Consider This Model

• A taller bowl may suit adults who find low toilets uncomfortable.
• The round-front shape can help where front clearance is limited.
• Separate tank and bowl make individual pieces easier to handle during installation.
• EverClean and PowerWash support routine bowl care.

Limitations

• Uses more water per flush than a 1.28 GPF toilet.
• Does not qualify for WaterSense at 1.6 GPF.
• A taller round bowl will not suit every user.
• The right-hand lever needs to match your bathroom layout.

American Standard 215CA.104.222 Cadet Pro 1.28 GPF Toilet Review

The 215CA.104.222 is the better match if you want an elongated bowl and prefer standard height. Its linen finish is warmer than bright white, so compare it with your existing fixtures before ordering. Similar-looking colors from different manufacturers may not match.

The important correction in these American Standard Cadet Pro reviews is that this model has a 15-inch bowl rim height before the seat is fitted. It is not a Right Height model. The elongated bowl gives you a longer seating area, while the lower height may suit shorter adults and some family bathrooms.

Technical Specifications

The published MaP score describes waste removal under controlled test conditions. It is a useful performance indicator, but it does not guarantee that every load will clear in one flush. Correct installation, tank water level, and drain condition all affect everyday performance.

At 1.28 GPF, this model uses 20% less water per flush than a 1.6 GPF toilet. For example, at 20 flushes per day, the difference is approximately 2,336 gallons per year. Your actual bill savings depend on your water and sewer rates.

The elongated bowl needs more front clearance than a typical round-front bowl. Check the door swing and nearby cabinets rather than relying only on the rough-in measurement. The nominal dimensions above are a starting point; use the drawing for the exact fixture being supplied.

For another flushing approach, read our VorMax Plus review. If you are comparing brands, our American Standard versus TOTO guide explains the wider differences.

Advantages

• Lower water consumption than the 1.6 GPF model.
• Elongated bowl with a standard-height sitting position.
• Published 1,000-gram MaP performance rating.
• EverClean surface and PowerWash bowl rinse.

Disadvantages

• Standard height may be less comfortable for people who prefer a taller toilet.
• Seat and supply connection add to the purchase cost.
• The tank-to-bowl joint adds a cleaning area and potential leak point.
• It is a single-flush toilet, with no separate reduced-flush setting.

Cadet Pro vs. Cadet 3 vs. Titan: What Should You Compare?

These are product families, so one set of dimensions or specifications cannot describe every toilet in each range. Compare exact model numbers for flush volume, bowl shape, height, rough-in, included accessories, and warranty.

 

The Titan toilet review can help you compare that alternative. If cleaning around a separate tank is your main concern, consider the designs in our one-piece toilet buying guide.

American Standard Cadet Pro Reviews: Buying and Installation Checks

• Measure the rough-in: Measure from the finished wall, excluding the baseboard, to the center of the floor outlet or mounting bolts on a typical installation.
• Check clearance: Allow room for the bowl, door, water valve, and seated user.
• Choose the correct seat: Match round-front or elongated shape and confirm mounting compatibility.
• Inspect the package: Confirm it includes the matching tank and bowl, and check separately for a seat, seal, and supply line.
• Check warranty terms: Current American Standard terms list limited lifetime chinaware coverage and five years on mechanical parts for qualifying noncommercial Cadet Pro use. Older documents show different terms, so keep the warranty supplied with your purchase.

During installation, tighten bolts evenly and avoid overtightening against the china. Set the tank water level to the specified mark, then check the supply connection and tank joints for leaks. If the floor flange is damaged or the toilet rocks, correct that problem before completing the installation.

Common Cadet Pro Problems and Practical Checks

Final Thoughts on These American Standard Cadet Pro Reviews

Choose the 215BA.005.020 if a taller round-front bowl and right-hand lever suit your bathroom. Choose the 215CA.104.222 if you prefer a standard-height elongated bowl and lower water consumption. Neither is the best choice for every household.

Before paying, confirm the exact model, complete package, availability, and warranty. These American Standard Cadet Pro reviews should help you narrow the choice, but the toilet’s fit and sitting comfort matter as much as its flushing specifications.

Frequently Asked Questions

1. Is the Cadet Pro 215BA.005.020 elongated?

No. The 215BA model family uses a Right Height round-front bowl. Some seller titles can be misleading, so check the manufacturer’s model information and the actual bowl supplied.

2. Is the 215CA.104.222 a comfort-height toilet?

No. It has a standard 15-inch bowl rim height without the seat. If you want a taller elongated bowl, compare an appropriate Cadet Pro Right Height model instead.

3. Do these Cadet Pro toilets include a seat?

Do not assume so. The manufacturer’s 215CA.104 specification sells the seat separately. A retailer may offer a bundle, but the listing should clearly identify what is included.

4. How does the Cadet flushing system work?

Tank water enters the bowl through the flush valve. The water flow starts the siphoning action that carries waste through the trapway, while the rim flow rinses the bowl. Avoid flushing wipes or other items that can block the drain.

5. Is a right-hand flush lever automatically non-ADA-compliant?

No. Accessibility depends on the complete installation. Flush controls generally need to be on the open side of the toilet, and the installed seat height, clearances, and other requirements must also be met.

6. What rough-in do these two models need?

Both reviewed configurations use a 12-inch rough-in. Measure from the finished wall to the outlet center before ordering. Other Cadet Pro configurations exist, so confirm the full model number rather than assuming all versions fit the same opening.